Fluke 324 True-rms Clamp Meter measurements and optimized ergonomics make it the best general troubleshooting tool for commercial and residential electricians. The Fluke 324 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. The Fluke 324 clamp meter is ideally suited for current measurements up to 400A in tight cable compartments. 324 model also includes temperature and capacitance measurement capabilities. The design of the Fluke 324 improve on the designs of the old clamp meters to make them tougher and easier to use. The Fluke 324 is rugged, reliable and precise. Fluke 324 True-rms Clamp Meter comes complete with: test leads, soft case, user's manual

		323	324	325
AC current	Range	400.0 A	40.00 A/400.0 A	40.00 A/400.0 A
	Accuracy	2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)	1.5 % ± 5 digits (45 Hz to 400 Hz) Note: Add 2 % for position sensitivity	2 % ± 5 digits (45 Hz to 65 Hz) 2.5 % ± 5 digits (65 Hz to 400 Hz)
DC current	Range			40.00 A/400.0 A
	Accuracy			2 % ± 5 digits
AC voltage	Range	600.0 V	600.0 V	600.0 V
	Accuracy	1.5 % ± 5 digits	1.5 % ± 5 digits	1.5 % ± 5 digits
DC voltage	Range	600.0 V	600.0 V	600.0 V
	Accuracy	1.0 % ± 5 digits	1.0 % ± 5 digits	1.0 % ± 5 digits
Resistance	Range	400.0 Ω/ 4000 Ω	400.0 Ω/ 4000 Ω	400.0 Ω/ 4000 Ω/ 40.00 kΩ
	Accuracy	1.0 % ± 5 digits	1.0 % ± 5 digits	1.0 % ± 5 digits
Continuity		≤ 70 Ω	≤ 30 Ω	≤ 30 Ω
Capacitance			100.0 μF to 1000 μF	100.0 μF to 1000 μF
Frequency				5.0 Hz to 500.0 Hz
AC response		True-rms	True-rms	True-rms
Backlight			Yes	Yes
Data hold		Yes	Yes	Yes
Contact temperature			-10.0 °C to 400.0 °C (14.0 °F to 752.0 °F)	-10.0 °C to 400.0 °C (14.0 °F to 752.0 °F)
Min/Max				Yes
Category rating		CAT III 600 V CAT IV 300 V	CAT III 600 V CAT IV 300 V	CAT III 600 V CAT IV 300 V